Get Sofa & Furniture Repair – Fast & Affordable
Free inspection · 500+ homes served · Same-day service available
The Core Question: Is It the Fabric or the Foam?
Most sofa owners feel the problem before they can name it. The seat that used to cradle you now bottoms out. The backrest cushion has lost its springiness. But when you call for a quote, you hear two very different services — foam replacement and complete sofa upholstery — and the price gap between them can be ₹20,000 or more. Choosing wrong means either spending far more than you needed to, or fixing one layer while the other quietly continues to deteriorate.
The root cause is usually one of two things: the internal foam core has compressed and lost its ILD (Indentation Load Deflection) rating, or the outer fabric has stretched, torn, faded, or simply stopped looking presentable. Sometimes it is both — but often it is just one. A proper diagnosis before any work begins is the single most important step in a sofa restoration project.
At FurniRevive, every sofa assessment starts with a hands-on inspection of both layers — foam density, structural frame integrity, and fabric condition. This guide walks you through the same diagnostic logic our technicians use, so you can arrive at the right answer before you spend a rupee.
What is Sofa Foam Replacement?
Sofa foam replacement is a targeted, internal intervention. The technician removes the existing fabric covers (unstitching seams, removing piping), extracts the old foam cores from the seat cushions and sometimes the back cushions, and replaces them with fresh-cut foam of the appropriate density and grade. The fabric covers are then re-stitched and refitted over the new foam.
In scope, foam replacement typically covers: seat cushion foam (the primary wear point), back cushion foam if sagging, and in some cases the base platform padding that sits on top of the sofa's webbing or spring system. What it does not touch is the fabric itself — the covers go back on as-is — nor the frame, the webbing, the springs, or the stitching pattern.
This makes foam replacement the right choice when the external fabric is still in good visual condition, the stitching is intact, and the only complaint is loss of comfort or firmness. If the fabric looks good but the sofa "feels dead," foam is almost certainly the answer.
What is Complete Sofa Upholstery?
Complete sofa upholstery — also called full reupholstery — is a comprehensive rebuild of the sofa's exterior. The entire fabric is stripped down to the frame, the foam and padding layers are replaced, new fabric is cut and fitted, and the sofa is stitched back together with fresh piping, tufting, or channel detailing as required by the original design.
In scope, full upholstery covers: complete fabric replacement (all panels — seat, back, arms, sides, base skirt), new foam throughout, replacement of worn webbing or spring ties if needed, re-stitching of all seams and piping, and in some cases minor frame tightening. You essentially receive a new exterior on your existing structure.
Full upholstery is the appropriate service when the fabric is visibly damaged (cuts, stains that won't lift, pet damage, severe fading), when the owner wants to change the colour or texture of the sofa, or when the sofa has both fabric and foam problems simultaneously. See our [ultimate sofa upholstery guide](/blog/ultimate-sofa-upholstery-guide) for a deep dive into the full process.
Get Exact Repair Cost in 2 Minutes
Share your details — we'll send you a price on WhatsApp right away.
Cost Comparison: Foam Replacement vs Full Upholstery (₹ Ranges)
The cost difference between the two services is significant, and understanding what drives it helps you evaluate quotes accurately.
**Foam replacement only:** ₹2,000–₹8,000 for a standard 3-seater sofa. The range depends on the number of cushions, the foam grade selected (PU vs HR vs Memory Foam), and the foam thickness required. A single seat cushion on a simple sofa might cost ₹800–₹1,500 in foam alone. An L-shaped sofa with back cushions added can reach ₹6,000–₹8,000. Labour is relatively low because the fabric is not being cut or re-stitched from scratch.
**Complete sofa upholstery:** ₹8,000–₹35,000 for a 3-seater, depending primarily on fabric choice and sofa complexity. Entry-level polyester fabrics start the range lower; mid-grade velvet or woven fabrics push costs to ₹15,000–₹25,000; imported leatherette or genuine leather can reach ₹30,000–₹35,000 or beyond. Labour is substantially higher because every panel must be measured, cut, and stitched. For a detailed breakdown of fabric costs, see our guide on [sofa fabric change cost](/blog/sofa-fabric-change-cost).
**Both together:** If your sofa needs new foam and new fabric simultaneously, the total is typically 10–15% less than paying for each service separately, because some labour steps overlap (the sofa is already stripped for fabric work, so swapping foam adds minimal time).
The key takeaway: if your fabric is fine, paying ₹20,000 for full upholstery to fix a ₹4,000 foam problem is a significant waste. Conversely, doing foam-only work on a fabric that has another 6 months of life in it means you will be calling again soon.
When Foam Replacement Alone is Enough
Foam-only replacement is the right call when all of the following are true:
**The fabric is still structurally sound.** No cuts, no fraying seams, no pet damage, no severe staining. Some surface pilling or minor fading that you can live with does not rule out foam-only work.
**The colour and texture still suit your space.** If you are happy with how the sofa looks and just want it to feel like new again, there is no reason to touch the fabric.
**The complaint is purely comfort-based.** Bottoming out on the seat, losing back support, cushions that don't spring back — these are foam symptoms. A sagging sofa that looks fine but feels exhausted is a classic foam replacement candidate.
**The structure is intact.** If the sofa frame is solid, the webbing has not snapped, and the springs (if any) still have tension, foam replacement alone will restore the sofa comprehensively.
One practical test: press your hand firmly into the seat cushion and count how quickly it returns. A healthy foam at 40D density should recover in 2–3 seconds. If it takes longer than 5 seconds or stays compressed, the foam has degraded well below its rated ILD and needs replacement.
When You Need Full Upholstery (Fabric Gone, Structure Weak, Major Overhaul Needed)
Full upholstery is the appropriate — and unavoidable — choice in these situations:
**Fabric damage that cannot be hidden or repaired.** A deep cut from a knife or pet claw, a burn mark, a set-in oil stain that covers more than a few square centimetres, or UV fading that has bleached one side of the sofa. No amount of cleaning or foam work will address visible fabric failure.
**You want a completely different look.** Changing the colour, switching from fabric to leatherette, moving from a plain weave to a velvet — any desired aesthetic change requires full upholstery regardless of the foam's condition.
**Both foam and fabric have deteriorated simultaneously.** This is common in sofas over 8–10 years old. The foam has compressed and the fabric has stretched and faded together. Replacing only the foam here leaves you with a more comfortable sofa that still looks worn.
**Structural repairs are also needed.** If the webbing has snapped, a spring has broken, or the frame has a loose joint, the sofa must be stripped anyway to access these components. Since the fabric comes off for structural work, it is usually economical to replace it at the same time rather than refit old fabric onto a freshly repaired frame.
Understanding your sofa's signs of deterioration before requesting a quote will save you back-and-forth. Our article on [signs your sofa needs reupholstery](/blog/signs-your-sofa-needs-reupholstery) provides a thorough checklist.
Understanding Sofa Foam: HR Foam vs PU Foam vs Memory Foam — Density Guide
Not all foam is created equal, and the grade you choose has a direct impact on how long your replacement lasts and how it feels day to day. Here is what each type means in practical terms:
**PU (Polyurethane) Foam** is the most common and economical option. It is available in densities from 18D to 40D. In the sofa context, 24D–28D PU foam is typically used for back cushions where loads are lighter; 32D–35D is adequate for budget seat cushion replacements but will compress significantly within 2–3 years under daily use. ILD (the measure of firmness, expressed in pounds per 50 sq inch) for standard seating PU foam runs 25–35 ILD — medium firm. PU foam degrades faster than HR foam under heat and humidity, which matters in Delhi summers.
**HR (High Resilience) Foam** is the benchmark for quality sofa foam. HR foam is rated by density (kilograms per cubic metre) and by ILD. A 40D HR foam with an ILD of 35–40 is the sweet spot for primary sofa seating — firm enough to support without feeling hard, resilient enough to recover its shape fully after each use. 50D HR foam is used for heavy-duty commercial upholstery or for owners who prefer a firmer feel. HR foam's cellular structure is more uniform than standard PU, which is why it lasts 7–12 years versus PU's 3–5 years. At FurniRevive, we default to 40D HR foam for seat cushions unless a customer specifically requests otherwise.
**Memory Foam** (visco-elastic foam) works by responding to body heat and weight, conforming to your shape and releasing slowly. It typically runs at 50–85 ILD when cold and drops to 10–20 ILD at body temperature — the "sinking in" sensation many people associate with luxury. However, in pure sofa seating applications, 100% memory foam is rarely ideal: it retains heat, recovers slowly (5–10 seconds), and can feel too soft for upright seating posture. The best application is a memory foam topper (1–1.5 inch layer) over a 40D HR foam base — you get the contouring comfort of memory foam without losing the structural support of HR foam beneath.
**A practical density guide for sofa cushion foam replacement:**
• Back cushions (light load): 28D–32D HR or good PU | ILD 20–28 (softer feel)
• Seat cushions (daily use, standard weight): 35D–40D HR | ILD 30–38 (medium-firm)
• Seat cushions (heavy use, heavier occupants): 44D–50D HR | ILD 38–45 (firm)
• Armrest pads: 24D–28D PU | ILD 20–25 (light duty)
• Memory foam topper over HR base: 2–4 lb density memory foam (50–85 ILD cold) over 40D HR core
The Hidden Issue: What Happens When You Only Replace Foam but Ignore Fabric
This scenario plays out more often than people expect. A customer replaces seat cushion foam because the sofa feels dead. The new foam is firm and springy. Two months later, the fabric starts to look worse than before — because the new, fuller foam is putting more tension on an already-stretched fabric, exaggerating every wrinkle, seam stress, and thin patch that was previously hidden by the depressed old foam.
Worn fabric that was loosely draped over collapsed foam will now pull tightly over the restored foam profile. Weak seams that held together under low pressure will begin to split. This is particularly common on older sofas where the seat fabric has stretched significantly — the fabric has memory of the collapsed shape, and a new foam core fighting against that memory accelerates failure.
The lesson is not that foam replacement is wrong — it is that a proper pre-assessment of fabric condition is essential before deciding on scope. If the fabric has less than 12–18 months of structural life left, the economics of doing foam-only work are unfavourable: you will spend on foam now and on full upholstery shortly after. A combined service done once is almost always cheaper than two separate visits.
This is also why FurniRevive provides a full condition report before quoting. We rate both foam and fabric on a simple 5-point scale so you have a clear picture of which layer is failing and by how much.
Decision Framework: Foam Only or Full Upholstery? (Structured Decision Tool)
Use this decision path to arrive at the right service for your sofa. Answer each question honestly based on current condition — not how the sofa looked when new.
**Step 1 — Fabric visual check:** Is the fabric free of cuts, pet damage, set-in stains, or significant fading?
→ YES: Proceed to Step 2. → NO: Full upholstery is required regardless of foam condition.
**Step 2 — Fabric structural check:** Are all seams intact? No fraying at edges or piping? Fabric does not feel thin or papery anywhere?
→ YES: Proceed to Step 3. → NO: Full upholstery is required (seam failure will accelerate under new foam tension).
**Step 3 — Comfort check:** Is the primary complaint loss of firmness, bottoming out, or poor back support rather than appearance?
→ YES: Proceed to Step 4. → NO (complaint is purely aesthetic): Full upholstery if you want colour change; foam-only if the look is fine and the feel is also fine.
**Step 4 — Foam recovery test:** Press firmly on the seat for 5 seconds. Does it recover fully within 3 seconds?
→ NO (slow recovery or stays compressed): Foam replacement is indicated. → YES (foam feels fine): The issue may be webbing or spring failure — inspect the base before ordering foam.
**Step 5 — Age and usage estimate:** How old is the sofa and how intensively is it used?
→ Under 6 years, normal family use: Foam-only work will give you another 5–7 years if fabric passes Steps 1–2. → 7–10 years, heavy use: Consider whether fabric will outlast the new foam. If in doubt, combine both services now. → Over 10 years or commercial/heavy use: Full overhaul (foam + fabric + structural check) almost always makes financial sense.
**Outcome:** If you reached this step via YES answers on all questions, foam replacement alone is your answer. If any NO was triggered, refer back to the indicated recommendation. For a full walkthrough of what the upholstery process looks like when you do need it, see our [sofa upholstery process](/blog/sofa-upholstery-process) guide.
How FurniRevive Helps You Choose the Right Service
At FurniRevive, we do not default to recommending the more expensive service. Our job is to give you an honest assessment of what your sofa actually needs — and then deliver that service to the highest standard.
Our process starts with a free home inspection across Delhi NCR. A trained technician assesses foam density (we use a simple push-and-time test alongside visual inspection of foam cross-section where cushion zip access allows), fabric condition, seam integrity, frame health, and webbing/spring status. You receive a written condition report and a tiered quote: foam-only, foam and fabric, or full structural overhaul.
For foam replacement, we use only 40D HR foam for seat cushions by default, with 50D available on request. We source from certified foam manufacturers in Delhi and cut to the exact dimensions of your original cushion profiles — no off-the-shelf sizes that leave wrinkles or voids.
For full upholstery, we carry over 200 fabric swatches across polyester weaves, velvets, microfibre, leatherette, and genuine leather. Our in-home consultations let you see fabric samples on your actual sofa in your actual lighting — a much more accurate test than looking at swatches under a showroom's fluorescent lights.
Whether you need just new foam or a complete transformation, our team is reachable at +91 92179 99355. You can also [book a free inspection for sofa upholstery in Delhi](/sofa-upholstery-delhi) directly on our website. Let us help you make the right call for your sofa — and your budget.
500+
Homes served
Trusted
By hundreds of customers
6-mo
Warranty
Priya Sharma
South Delhi
Got my sofa repaired in just 3 hours. The technician was professional and the quality is amazing. Saved ₹18,000 vs buying new!
Rahul Mehta
Noida Sector 62
Called at 10 AM, team arrived by noon. Recliner mechanism was fixed perfectly. Highly recommend FurniRevive.
Anita Kapoor
Gurgaon DLF
My leather sofa had a big tear. They repaired it so well that you can't even tell there was damage. Great value!