Get Sofa & Furniture Repair – Fast & Affordable
Free inspection · 500+ homes served · Same-day service available
Most homeowners know they want their sofa reupholstered but have no clear picture of what actually happens once the technician arrives. The sofa reupholstery process is more involved than simply wrapping new fabric around old cushions — it is a systematic rebuild of every layer that makes a sofa comfortable and durable.
At FurniRevive we follow a strict eight-step process on every job. Understanding these steps helps you evaluate quotes, set realistic expectations on timing, and make informed decisions about materials. Below we explain each stage in detail, what gets replaced, and why skipping any step leads to a sofa that looks good for a year but falls apart shortly after.
For context on pricing at each stage, see our guide on sofa fabric change cost. For a broader overview of the craft, read our ultimate sofa upholstery guide.
What to Expect Before the Technician Arrives
The process begins well before anyone touches your sofa. When you contact FurniRevive at +91 92179 99355, our team will ask a few qualifying questions: the sofa size and configuration (L-shape, 3-seater, recliner), approximate age, the type of damage, and whether you have a preferred fabric in mind.
We then schedule a free home assessment. During this visit the technician examines the frame, springs, existing foam, and the condition of the current cover. This is not a formality — frame condition and spring type directly determine how long the job will take and what materials are needed.
After the assessment you receive a written quote broken down by stage. You also choose your fabric from our sample collection. We carry over 200 fabric options including cotton weaves, velvet, leatherette, genuine leather, and outdoor-grade synthetics. Pattern-matched fabrics (stripes, large florals) require additional yardage and are quoted separately. Once the fabric is confirmed and the quote accepted, the job is scheduled.
Step 1 – Initial Assessment and Diagnosis
On the day of the job the technician begins with a thorough diagnosis before removing a single staple. This is arguably the most important step: problems discovered mid-job are far more disruptive and expensive than problems spotted upfront.
The technician checks four systems independently. First, the frame — any wobble, crack, or soft spot in the wood is noted. Second, the suspension — springs are pressed by hand to identify broken coils, snapped zigzag sections, or failed webbing. Third, the foam and padding layers — seats are compressed to judge density loss; backs and armrests are examined for flattening. Fourth, the current fabric — the technician checks whether the existing fabric has been glued, stapled, or hand-sewn, because each method changes the stripping approach.
A written condition report is shared with you before work begins. If the diagnosis uncovers something not visible during the initial assessment — say, a cracked rear rail hidden under the dust cover — this is the moment the scope and cost are adjusted, not after the sofa is already stripped.
Get Exact Repair Cost in 2 Minutes
Share your details — we'll send you a price on WhatsApp right away.
Step 2 – Stripping the Old Upholstery
With diagnosis complete, the technician removes all existing fabric, padding, and trim. Stripping is done layer by layer — dust cover first, then base fabric, welting and piping, then cushion covers. Staples are pulled with a pneumatic staple remover or hand tack-puller rather than ripped out, because tearing staples out damages the wood substrate and creates a poor surface for new staples.
Old foam and Dacron wrapping are removed and set aside. In most cases they are not reused — foam degrades beyond recovery after five to eight years even if the sofa looks acceptable. However, the technician inspects them before disposal: occasionally a relatively new sofa has only damaged fabric with perfectly serviceable HR foam underneath, and reusing it saves cost without compromising quality.
All metal components — zips, rings, recliner mechanisms — are catalogued. Hardware in good condition is cleaned, lubricated, and reinstalled. Worn or corroded hardware is replaced.
Step 3 – Frame Inspection and Repair
With the sofa stripped bare the frame is fully visible for the first time. This is where frame quality determines how long the finished sofa will last — no amount of premium fabric compensates for a weak frame underneath.
FurniRevive technicians assess three things. First, the wood species and grade. Kiln-dried hardwood (sheesham, beech, teak) is the benchmark — it resists warping and holds staples firmly for decades. Budget sofas often use MDF or particle board, which deteriorates rapidly around staple lines. Second, joint integrity — mortise-and-tenon joints are far superior to dowel-and-glue or screw constructions. Loose joints are re-glued with PVA or epoxy and clamped. Third, structural cracks — hairline cracks in non-load-bearing rails are filled; cracks in primary load-bearing members (front seat rail, rear leg blocks) require a timber patch or full section replacement.
If the frame is MDF or particle board in load-bearing areas, we advise the customer honestly about the trade-off: the sofa can be reupholstered and will look excellent, but the frame life is limited regardless of what we do to the upholstery. That transparency is part of our process.
Step 4 – Spring and Webbing Work
The suspension layer — springs and webbing — is what gives a sofa its support character. Two types are common in Indian market sofas.
Zigzag springs (also called sinuous springs or serpentine springs) are S-shaped steel wires that run front-to-back across the seat frame, clipped to the rails. They are inexpensive and adequate when properly tensioned, but individual coils snap after heavy use or if the sofa is regularly overloaded. Broken zigzag coils are replaced individually; if more than half the coils are broken, the full set is replaced for even support across the seat.
Pocket springs are individual coil springs sewn into fabric pockets, similar to premium mattress construction. They provide independent support per spring and are found in higher-end sofas. Worn pocket spring units are replaced as complete cassettes rather than repaired spring-by-spring.
Webbing — jute or synthetic straps woven across the base of the frame — is replaced on every job regardless of apparent condition. Old webbing stretches permanently and is the single most common cause of a sofa that sags again within a year of reupholstery. We use 7.6 cm wide polypropylene webbing tensioned to approximately 10% stretch and stapled with 16 mm divergent staples on a double row.
Step 5 – Foam and Padding Layer
Foam selection is where comfort is built. Two grades are relevant for residential sofas.
High-resilience (HR) foam with a density of 40–45 kg/m³ and an ILD (indentation load deflection) of 28–35 is the standard for seat cushions. Lower density foam (32 kg/m³ or below) compresses faster and loses its rebound within two to three years. FurniRevive does not use sub-40 kg/m³ foam in seat cushions — it saves very little on cost while significantly reducing the life of the job.
PU foam at 28–32 kg/m³ density is appropriate for back cushions and arm padding where loads are lighter and comfort expectations are softer. Seat bases are cut to exact frame dimensions, glued to the platform, and bevelled at edges to prevent a hard ridge under the fabric.
Dacron (polyester fibre wrap) is applied over foam on all visible cushions. A 60–80 gsm Dacron layer adds a rounded, full silhouette, prevents the fabric from reading every foam edge, and adds a perceptible softness at the contact layer. It is staple-glued at the back and wrapped around edges before the fabric goes on.
For sofas with removable loose cushions, a cambric (bottom ticking) is sewn onto each cushion form before the outer cover is fitted, preventing foam migration inside the cover over time.
Step 6 – Cutting and Fitting the New Fabric
Fabric cutting is where the job either looks professional or amateur. Every panel is cut from a master template made from the stripped original pieces, adjusted for the new foam thickness. Templates are laid on the fabric face-down and traced with chalk or a felt-tip marker on the wrong side.
Pattern matching — aligning stripes, checks, or large repeat motifs across panels — is done at the cutting stage, not during fitting. This requires extra fabric (typically 15–25% additional yardage for large repeats) but is essential for a polished result. Misaligned patterns across a sofa back or seat-to-cushion join are the most visible sign of a rushed job.
Piping (also called welting) is cut on the bias from the same fabric or a contrasting colour and machine-sewn over 6 mm cord. It defines seam lines on arms, front seat borders, and backs. Piping is not decorative only — it reinforces the seam against wear at the highest-friction points of the sofa.
Zips on removable cushion covers are set 5 cm back from the bottom edge so they are invisible when the cushion is in place. Concealed zips are used on velvet and fine weaves; standard nylon coil zips on everyday upholstery fabrics.
Step 7 – Stapling, Sewing and Finishing
Assembly is the stage that separates a good upholstery job from a great one. The sofa body panels are fitted and temporarily tacked with skewers before any permanent staples are driven, so the technician can check tension and grain alignment while there is still room to adjust.
Permanent attachment uses a pneumatic staple gun with 10 mm or 12 mm divergent staples. Staple spacing is 2–3 cm on straight runs and 1 cm around curves and corners. All raw edges are folded under by 1.5 cm before stapling — no raw edges are ever left exposed inside the frame.
Tack strips (cardboard strips with exposed tacks) are used along the back panel where a clean straight line is needed without a visible seam — a technique called back-tacking. The fabric is laid face-down, tacked in place, then folded up and over to reveal a crisp, straight edge.
Arm panels and outside back panels are slip-stitched by hand using a curved needle and waxed linen thread where a seamless finish is required. This hand-sewing takes longer than stapling but produces the neat, tailored appearance expected on quality upholstery work.
The dust cover — a black non-woven fabric — is stapled to the underside of the frame, covering all internal workings and providing a finished base when the sofa is lifted.
Step 8 – Final Inspection and Cleanup
Before the technician considers the job done, every element is checked against a quality checklist. Seams are examined for consistent tension — puckering or pulling indicates insufficient ease was allowed during cutting. Piping lines are checked with a straight edge. All staples are checked to confirm they are fully driven with no protruding crowns that would eventually cut through fabric from inside. Zips are opened and closed several times. Cushions are placed and removed to confirm they seat correctly without bunching.
Any loose threads are trimmed. The sofa is cleaned with a lint roller and a damp microfibre cloth. All scrap fabric, removed foam, and old hardware are bagged and removed from your home — we do not leave offcuts or old materials behind.
You are then given a care guide for the specific fabric chosen, including cleaning method, recommended products, and what to avoid. FurniRevive provides a warranty on workmanship (stitching and fitting) and a separate manufacturer-backed warranty on the foam used. For warranty queries, call us at +91 92179 99355.
What Gets Replaced at Each Stage
The table below summarises what is typically replaced versus retained at each stage of the sofa reupholstery process. "Inspected and retained if sound" means the component is assessed and only replaced if it fails the criteria described earlier in this guide.
Stage | Component | Outcome ------|-----------|-------- Stripping | Old fabric and cover panels | Always removed and discarded Stripping | Cushion foam (seat) | Replaced if density below 40 kg/m³ or age over 5 years Stripping | Hardware (zips, rings) | Cleaned and reused if functional; replaced if corroded Frame repair | Wooden joints | Re-glued if loose; patched if cracked Frame repair | MDF or particle board sections | Replaced with hardwood if load-bearing Spring work | Zigzag coil springs | Replaced individually or as a full set Spring work | Webbing | Always fully replaced Foam layer | Seat foam | Always replaced with HR foam 40–45 kg/m³ Foam layer | Back and arm foam | Replaced with PU foam 28–32 kg/m³ Foam layer | Dacron wrapping | Always replaced Fabric fitting | Piping cord | Always replaced with new cord Fabric fitting | Zips | Replaced on all cushion covers Final stage | Dust cover | Always replaced
If a component is listed as "always replaced", it is replaced regardless of apparent condition. This avoids the situation where one failed component undoes an otherwise well-executed job six months later.
For leather sofas specifically, the process differs slightly at the foam and fabric stages — see our leather sofa upholstery guide for those details.
How Long Does the Full Process Take?
Duration depends on sofa size, complexity, and which stages require substantial repair work.
A standard 2-seater or 3-seater sofa with no major frame issues and a plain fabric (no pattern matching) can be completed in a single day — typically four to six hours on-site. This assumes the foam and webbing are pre-cut and the fabric is confirmed before the technician arrives.
An L-shape sectional or corner sofa typically takes one full day to strip and rebuild, plus a second visit of three to four hours for final fitting if the outer panels require hand-stitching. Total: one to two days.
Recliners add complexity because the mechanism must be unbolted and reinstalled around the new upholstery. A recliner sofa adds approximately two to three hours to any job.
Frames requiring structural repair — cracked rails, full joint rebuilds — add one to two days because adhesive needs curing time before the frame can be loaded with springs and foam. We are transparent about this at the assessment stage so it does not come as a surprise.
In most cases FurniRevive completes the job at your home in a single visit. We do not take sofas away to a workshop unless structural repairs require machinery unavailable on-site. All fabric cutting, foam fitting, and final finishing happen in your home. To book an assessment or check availability for your area, call us at +91 92179 99355 or visit our sofa upholstery Delhi service page.
If your sofa also needs frame or spring repairs beyond reupholstery, see our sofa repair Delhi page for the full repair service.
500+
Homes served
Trusted
By hundreds of customers
6-mo
Warranty
Priya Sharma
South Delhi
Got my sofa repaired in just 3 hours. The technician was professional and the quality is amazing. Saved ₹18,000 vs buying new!
Rahul Mehta
Noida Sector 62
Called at 10 AM, team arrived by noon. Recliner mechanism was fixed perfectly. Highly recommend FurniRevive.
Anita Kapoor
Gurgaon DLF
My leather sofa had a big tear. They repaired it so well that you can't even tell there was damage. Great value!